There are two types of pneumatic slides, one is called slide cylinder the other is called air float slide. . Their media are different, a compressed air, a hydraulic related information oil. Their load-carrying capacity is different, because pneumatic is generally below 1MPa, hydraulic is generally below 30MPa (domestic), higher than this value is too high requirements for components pumps. (There is a problem. Pneumatic can pull out the trachea to let it spit out. Is there any gas to be eliminated? The general situation of hydraulic pressure cannot do this. Danger! The working principle of the pneumatic slide table:

  Compressed air is fed into the cylinder on the fixed mold, the guide rod is pushed by the cylinder at one end, is pushed in the opposite direction. The stroke of the guide depends on the length of the guide rod. It is a linear drive mechanism widely used in the automation industry.

 Please adopt, ball screw positioning accuracy, etc. In the machine tool, thank you. The load capacity is a parameter that is emphasized in the design application. Its durable performance is automatically designed.