The use of the cylinder should comply with the relevant safety regulations. When a failure occurs, there should be an emergency stop device. After the work, the compressed air inside the cylinder should be discharged.
Cylinder maintenance maintenance methods:
When the cylinder is overhauled reassembled, the parts must be cleaned, especially to prevent the seal ring being sheared damaged, pay attention to the installation direction of the dynamic seal ring.
2. During use, regularly check the cylinders for abnormal phenomena, loose connections, etc., lubricate the moving parts of the cylinders with shaft pins.
3. When the cylinder is used for a long time, all processing surfaces should be coated with anti-rust oil, the inlet exhaust ports should be blocked with dust.
4. When the cylinder is overhauled reassembled, the parts must be cleaned, no dirt can be brought into the cylinder. In particular, it is necessary to prevent the sealing ring being sheared damaged pay attention to the installation direction of the dynamic sealing ring.
5. Work out a monthly, quarterly yearly maintenance system for the cylinder,
When the cylinder is working, the piston will hit the cylinder head. The cylinder head cushion seal is a wearing part. If the cushion seal is damaged seriously, the cylinder will get a good seal between the cushion plunger the cushion seal before the stroke end Thereby losing the buffering effect. If the cylinder is used for a long period of time, it is generally necessary to replace the sealing ring apply grease at the same time.